Surface-cleaner passes with no wand stripes
Driveway & Concrete Cleaning
Concrete is the one surface that genuinely wants pressure. The trick is applying it evenly, which a spinning surface cleaner does and a hand wand never will.
Why your concrete looks gray
It happens slowly enough that most people never notice until a section gets cleaned and the contrast shows up. What you are looking at is three things layered together: organic growth in the pores, road film tracked in by tires, and oil or rust that has soaked in and set.
Each comes off differently. Organic growth needs a cleaner, road film needs pressure, and oil and rust need to be treated before either one will touch them.
Surface cleaner, not a wand
A hand wand cleans in a stripe. Even with a careful operator, overlapping arcs leave a zebra pattern that shows up worse once the slab dries — and it is permanent until the whole slab is redone properly.
A surface cleaner spins two jets under a shroud and covers the slab at one consistent distance and pressure. The result is even edge to edge, with no feathering and no stripes.
What we clean
- Driveways, aprons and parking pads
- Sidewalks, walkways and front steps
- Patios, pool decks and pavers
- Garage floors and shop bays
- Dumpster pads and commercial walkways
- Curbing and retaining walls
Oil, rust and the honest answer
Some stains lift completely. Some lighten and stay lightened. Deep oil that has been soaking into a slab for a decade will improve, but anyone promising it will vanish is selling you something.
We will tell you which category your stain is in before we start, not after you have paid.
Driveway and Concrete Cleaning across the 417 and NWA
We cover a 100-mile radius from Cassville. Pick your town for local detail and pricing factors:
Driveway and Concrete Cleaning
Questions we get.
Will pressure washing damage my concrete?
Properly done, no. Problems come from holding a wand too close or using too narrow a tip. A surface cleaner holds consistent distance and pressure, which is why we use one on flatwork.
Can you clean pavers and stamped concrete?
Yes, at adjusted pressure. Pavers may need joint sand topped up afterwards, and stamped or coloured concrete gets a gentler setting so the surface treatment is not damaged.
Do you seal concrete after cleaning?
Cleaning and sealing are separate jobs. If you want the slab sealed, tell us when you book so we can schedule the dry time properly — concrete has to be fully dry before sealer goes on.
How often should a driveway be cleaned?
Most look best on a yearly refresh in this climate. High-traffic commercial pads and dumpster areas usually want more frequent attention.
Other services
House Washing
The whole envelope: siding, soffits, fascia, shutters, trim, porch ceilings and the front door nobody ever gets to. Low pressure, the right cleaner, and enough dwell time to actually kill what is growing.
Roof Cleaning
Black streaks and moss removed with zero pressure, so the granules stay on the shingles where they belong.
Window Cleaning
Inside and out, tracks and sills included. Purified water and a squeegee, not a rag and a prayer.
Gutter Cleaning
Debris pulled by hand, downspouts flushed and checked, and the mess hauled off — not blown into your flower beds.
Deck Restoration
Gray, weathered boards brought back with controlled pressure and a wood-safe cleaner. Ready to seal when we are done.
Fleet & Equipment Washing
Trucks, trailers, skid steers and shop bays. Scheduled routes available so it never gets away from you.
Free quote
Send a photo. Get a price.
Fastest way is a text — snap a picture of whatever is dirty and send it over. Prefer the form? Fill it out and it will open a message with everything already filled in.
417-665-9027Request a free quote
Opens a text to 417-665-9027 with your details filled in — attach a photo before you hit send.